44 Pcs Cordless Screwdriver Professional Tools Rechargeable with LED Light 220v/ 4.8v/ 200r/min 1300mAH Li-Lon Mini Drill Power Tools

Controls and Components Pistol Driver: 1. Keyless Chuck 2. Led Light 3. Conversion button 4. Charging Port 5. Forward/Reverse Charging the Battery: 1. Be sure to place the tool on a clean dry surface within 3 feet (1 meter) of a 110-240V(AC)/ 50HZ/60HZ wall receptacle. 2. Insert AC adaptor into the Charging Port located on the back of the unit. 3. Plug the AC adaptor into the closert wall outlet. 4. Allow 2 to 3 hours for the battery to become fully charged. 5. Disconnect the unit after charging as the unit should be ready for use. 6. The LED battery level indicator should be able to tell you the amount of charge that you have on the battery. Operation: 1. Insert the bit into the chuck until it snaps into place, 2. Grasp the tool firmly with both hands.align the bit with screw and press it firmly into the screw. 3. Start the tool by squeezing the Forward/Reverse teigger . ("Press the top of the to turn the screw Forward, Press the bottom of the to Reverse the screw.) Troubleshooting Tips: Press the LED battery level indicator and be sure that the unit is fullycharged. Maintenance. * Use mild soap and a damp cloth to clean the tool. * Do not allow any liquids to get inside the tool. * Do net immerse any part of the tool in liquids. Specifications: Pistol Driver: Voltage : 3.6 Volts(DC) Torque: 3 N.m Speed (no load): 220 RPM/Min AC Adaptor: Input: 110-240 Volts(AC)/50 Hz/ 60Hz Output:5/6 Volts(DC)/300-400 mA Charging time: 2-3 hours (max 7 hours) LPA: 63 dB(A) LWA: 74 dB(A) Vibration: 2.5 m/s